.

75 IN. LB. MAX. TORQUE

35 IN. LB. MAX. TORQUE

50 IN. LB. MAX. TORQUE

BLDC ARE ALSO AVAILALBE ON PLANETARY GEARBOXES.  CLICK HERE.

50 IN. LB. MAX. TORQUE

100 IN. LB. MAX. TORQUE

At the right is the type that requires a drive circuit.  These motors are 1" shorter, but have similar output power.  We can provide the drive circuit and wire harnesses shown, or you can use your own 3 phase control.

Remember, these motors can be installed on any of our gearboxes.


This is the built-in "plug and play" controller that features directional and speed control.

All Rex Engineering gearboxes can be built with brushless DC ("BLDC") motors. 

There are a lot of good reasons to use BLDC.


      It is easy to control the speed and direction of a BLDC.

      Our pricing is very competitive.

      A tachometer/position signal is available to monitor speed and location.

      They generate very little electronic noise.

      Ball-bearing construction means they are very durable.


Obviously, there are no motor brushes to not wear out since the windings are electrically commutated.  However they do require a 3 phase driving circuit to operate.  We offer BLDC motors with the circuit built-in for "plug-and-play" simplicity.  We also have the drive circuit available on a separate PCB, along with the wire harnesses that will be required.


The gearboxes are permanently lubricated with synthetic gear grease.  The gearing material is steel, although plastic parts can be used if the loading is light.


The gearbox output shafts can be made to your specs, or we stock many common designs also.  They can be case-hardened, and are supported in either bushings or needle-bearings.


Accessories include linear motion, slip-clutches.....or whatever else you may require!


BLDC ("BRUSHLESS DC")  GEARMOTORS

50 IN. LB. MAX. TORQUE

250 IN. LB. MAX. TORQUE

35 IN. LB. MAX. TORQUE

To down load an outline drawing (.pdf format), just select one of the pictures, then click on the link button

that appears in the lower, right corner.

(permanent magnet motors are shown, but BLDC drawings will download)