"H2X" STYLE GEARBOX

MAX. TORQUE = 50 IN. LB.

"EX" STYLE GEARBOX

MAX. TORQUE = 250 IN. LB.

"HX" STYLE GEARBOX

MAX. TORQUE = 50 IN. LB.

"MINI BOX" STYLE GEARBOX

MAX. TORQUE = 35 IN. LB.

"CDX" STYLE GEARBOX

MAX. TORQUE = 50 IN. LB.

To download an outline drawing (.pdf format), just select one

of the pictures, then click on the link button

that appears in the lower, right corner.

"AX" STYLE GEARBOX

MAX. TORQUE = 100 IN. LB.

DC GEARMOTORS

"CXC" STYLE GEARBOX

MAX. TORQUE = 35 IN. LB.

"RG" STYLE GEARBOX

MAX. TORQUE = 35 IN. LB.

"CLX" STYLE GEARBOX

MAX. TORQUE = 75 IN. LB.

Rex Engineering manufacturers DC powered gearmotors in many configurations.  We will customize the speed, operating voltage, torque carrying capacity, shaft design, etc., doing whatever it takes to get your design moving!  The motors on this page use permanent magnet motors.  Brushless DC motors have more advanced capabilities, and can be viewed by clicking this red button. 



Our permanent magnet DC powered gearmotors are simple and reliable.  Connect DC power and they are running!   If you would like to control the direction of rotation and the motor speed, these motors respond well to inexpensive controllers.  The voltage range is from 6-30 VDC.


Also, most have EMI filters to greatly reduce the noise emissions.  The brushes are non-replaceable. 


Just like in our AC powered motors, the gearboxes are permanently lubricated with synthetic gear grease.  The gearing material is steel, although some plastic parts can be used for lower noise and only if the loading is light.


The output shafts can be custom made to your specs, but we also keep many common designs in stock.  They can be case-hardened, and are supported in your choice of bushings or needle-bearings.


Accessories include linear motion, encoders, cams and limit switches, slip-clutches and custom wire termination or wire harnesses.

.